http://dodge.wordpress.com/2006/09/13/help-with-a-master-cylinder/ "Ram Tough" isn't just a slogan, it's an explanation. Sun, 09 Aug 2009 14:54:46 +0000 http://wordpress.com/ hourly 1 http://dodge.wordpress.com/2006/09/13/help-with-a-master-cylinder/#comment-40 Michael Fri, 15 Sep 2006 14:29:12 +0000 http://dodge.wordpress.com/2006/09/13/help-with-a-master-cylinder/#comment-40 Good luck with this. It has been my experience with aftermarket parts that most seem to be made by the same supplier and marketed under different names. With a small demand part like this, I doubt you'll find many different manufacturers. One thing you may want to consider is doing some research to find out what you'd need to know about critical specs, capacity, pressure, tolerances, etc. and find a metal product from a different vehicle. As long as the specs match, I would think it would work. Find a good old down home mechanic and pose this to him... I'll bet he'd agree. Good luck, Michael in FL Good luck with this. It has been my experience with aftermarket parts that most seem to be made by the same supplier and marketed under different names. With a small demand part like this, I doubt you’ll find many different manufacturers. One thing you may want to consider is doing some research to find out what you’d need to know about critical specs, capacity, pressure, tolerances, etc. and find a metal product from a different vehicle. As long as the specs match, I would think it would work. Find a good old down home mechanic and pose this to him… I’ll bet he’d agree. Good luck, Michael in FL

]]>